Computer Converter Riser Card   >  SATA Series Adapter Card  >

  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215
PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215

PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215

  • PCI-E X1 to 4 Port Sata 3.0 6Gbps Converter Controller Adapter Marvell 88SE9215 Non-Raid for IPFS Hard Disk Raid Card
  • INQUIRY

PCIe X1 to 4 SATA 3.0 ports controller card offers a simple connection between a host computer and SATA 3.0 devices(SATA hard drive or SATA device), which allows 4 SATA devices at the speed up to 6Gb/s.

 

Features

Serial SATA 3.0, compatible with SATA 2.0 and SATA 1.0

PCI-Express V2.0, compatible with PCI-Express V1.0

Chipset: Marvell 88SE9215

Support speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps

Compatible with SATA 6G, 3G and 1.5G Hard Drives

Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i

Support 4 SATA 3.0 6Gbps devices

Support IDE/AHCI 1.0 mode

Support Native Command Queue (NCQ)

Port Multiplier FIS-based and Command-based switching supported

Support Hot Plug and Hot Swap

PCI-Express X1, can be used on PCIe X2 X4 X8 X16 slots

Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux

 

Package includes:

1 X PCIe X1 to 4 SATA 3.0 ports controller card

1 X Drivers CD

 

Product driver file:

1. CD: ... DRIVER\SATA CARD\Marvell\91XX_92XX Setup, then select the appropriate folder according to the system.

2. Group RAID software, enter the CD SATA CARD\Marvell\MSU 4.1.0.2023, install it.

 

The PCIE to SATA3.0 riser card is used as follows:

 

First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions:

 

1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pass. Our card riser card starts the system.

2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.

3, the above two conditions are available, if it still can not start, or repeatedly restart, then it may be the motherboard's hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboard's hard disk interface options to Disabled, save and restart to start the system

 

Second, the common disk and PCIE to SATA3.0 connection conditions and solutions:

 

1. When the system disk is plugged into the motherboard, the ordinary disk is inserted in the PCIE to SATA3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup.

2, if the condition is established, or can not start the system, then you must enter the motherboard BIOS, set the system disk to the first boot.

 

Third, the system disk and the ordinary disk and PCIE to SATA3.0 connection and solution:

 

1. Prerequisites, if the system disk with the original motherboard installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through PCIE to SATA3.0 .

2, 1 condition is established, you can not start to enter the motherboard BIOS, set the system disk to the first boot.

3, 1.2 conditions are met, or can not start, then it may be integrated SATA interface conflict, please enter the motherboard BIOS to set SATA to Disabled

 

Package includes:

1 X PCIe X1 to 4 SATA 3.0 ports controller card

1 X Drivers CD

Categories

search

Contact Us


Tel:+86-0755-28914760

Fax :+86-0755-28914760

Mobile:+86-13534236956

E-mail: [email protected]

Skype: [email protected]

Whatsapp: +8613534236956

contact us contact us contact us

Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian
Scan our wechatClose
our wechat